Defoaming Degassing

Excerpts from Newspapers and Magazines


Large Self-Priming Pump Lineup
Addition of 300 mm and 350 mm Bores
Top page
& Site map
Contact us


Featured in The Nikkan Kogyo Shimbun newspaper issued on Thursday, July 21, 2016

Large Self-Priming Pump Lineup
Addition of 300 mm and 350 mm Bores
Yokota Manufacturing Co., Ltd.

Yokota Manufacturing Co., Ltd. has added large self-priming pumps with bore diameters of 300 mm and 350 mm (photo) to the UB type series. Prices start from 3.5 million yen (tax excluded) for the 300 mm bore pump. A demand for the use of the pump in pumping large amounts of water, such as for water intake, is anticipated.
The company's self-priming pumps are designed to pump water by separating and discharging the air from the water suctioned into the pump using centrifugal force. Previously, the maximum processing ability of the UB type series pump was approximately 12 cubic meters per minute with the 250 mm bore pump. With the greatly enhanced self-priming performance achieved by improving the company's original self-priming mechanism, the 350 mm bore pump can now process approximately 23 cubic meters of water per minute.

Copyright for this article is with The Nikkan Kogyo Shimbun (Approval number: N-6753)

Large Self-Priming Pump Lineup

Copyright for this article is with The Nikkan Kogyo Shimbun



For details of this product, please refer to Process Pump UB series.


© Yokota Manufacturing Co., Ltd. Tel: +81 82-241-8672 E-mail: yokota@aquadevice.com Terms of Use