Top page Contact us

Structure

Part name 1 Casing 2 Suction cover 3 Rear cover 4 Impeller 5 Liner ring 6 Liner ring (with protector) 7 Impeller ring 8 Rear plate 9 Bracket 10 Bearing case 11 Bearing cover 12 Bearing cover 13 Shaft 14 Impeller nut 15 Impeller washer 16 Sleeve 17 Seal ring 18 Gland 19 Gland packing 20 Cone roller bearing 21 Cylinder roller bearing 22 Casing packing

Specifications
	Standard specifications
	All parts which come into contact with liquid are made of metal and the shaft is fully sealed to avoid contact with liquid.
	Slurry specifications
	The impeller, including the closed type, has a wear-resistant shape with rear vanes at the coupling side. The liner ring with the protector prevents wear of the suction cover caused by slurry blown against it. The rear plate, which is exchangeable, is installed at the rear side of the impeller to protect the casing from wear.
	Shaft seal
	Selection of the shaft seal most suitable for the type of liquid used and site conditions is possible.

Example of shaft seal (Optional)

For details of Non-External-Flushing Mechanical Seal, please refer to this page.

Features

Structure

Technical data

Selection & Dimensions

Inquiry form